High-speed PP plastic strapping machine 12mm PP strap making
machine with PLC chinese control
DESCRIPTION OF PP PACKAGING BELT PRODUCTION LINE:
PP strap making machune/PP plastic strapping machine is a high-end plastic extrusion equipment used to produce a wide
range of PP strapping products. Finished PP strapping can be produced in various colors including
transparent, red, yellow, blue, white, and printed with lettering.
Its applications are broad, primarily for: cardboard box strapping,
appliance strapping, clothing strapping, fruit strapping,
e-commerce product strapping, and building material strapping.
KEY HIGHLIGHTS:
Cooling system----Unique cooling circulation system makes the
strapping cool and shrink better and the size more accurate. The
internal reciprocating winding method is used to make full use of
heat energy, effectively reduce power loss, and make the equipment
more energy-saving, environmentally friendly and power-saving;
PLC system----The equipment adopts intelligent PLC Chinese/English version control system, which is simple and easy to understand,
beautiful, durable, long life and low failure rate. The equipment
has an exclusive parameter memory system, which can store data
after production of each specification, and can directly adjust the
parameters for the next production.
Wrapping machine----The equipment is equipped with a correction
device, the winding is neat and knife-cut, and the finished
strapping belt has good color and quality.
Electrical appliances---All electrical appliances of the equipment
are Sino-foreign joint venture brands, French Schneider switch
electrical appliances, Taiwan Yangming solid state, and Japanese TR
bearings.
EXTRUSION PARAMETERS TABLE
Model | PP-2 | PP-4 | PP-6 | PP-8 | PP-10 | PP-12 |
Raw material | PP polypropylene new material/recycled material |
Number of tapes | 2 | 4 | 6 | 8 | 10 | 12 |
Width(mm) | 5-19 | 5-19 | 5-19 | 5-19 | 5-19 | 5-19 |
Thickness(mm) | 0.4-1.2 | 0.4-1.2 | 0.4-1.2 | 0.4-1.2 | 0.4-1.2 | 0.4-1.2 |
Line speed(m/min) | ≧260-300 |
PLC control system | PLC | PLC | PLC | PLC | PLC | PLC |
Screw Model | 90 | 110 | 125 | 135 | 135 | 135 |
Reducer model | 200 | 220 | 250 | 280 | 280 | 280 |
Winding machine | Automatic winding machine /Semi-automatic winding machine |
Screen Changer | Automatic/Manua |
Production capacity 24H | 2.5-3T | 6-7T | 8-9T | 10-11T | 12-13T | 13--14T |
THE MAIN COMPONENTS OF PP STRAPPING EQUIPMENT:
Feeder---- transfer PP raw materials into the machine.
Extruder----heat and melt the PP raw materials and extrude them
into shape.
Molding mold---- make the molten PP strap embryo pass through the
mold to form a strip.
Cooling water tank----cool the extruded PP strap embryo to ensure
its shaping.
Tractor----pull out the cooled strapping belt to maintain a stable
production speed.
Oven---- heat the strapping belt to improve its strength and
toughness.
Embossing machine---- emboss the surface of the strapping tape to
increase friction and prevent slipping.
Shaping oven----heat again, shape, and make the PP strap more
standardized.
Reeler---- reel the strapping tape into rolls for easy storage and
transportation.
FEATURES OF EMBOSSING WHEEL:
1. The embossing wheel is nitrided and heat-treated to achieve a
surface hardness of 60 degrees, which is strong and durable. The
surface texture of the strapping belt pressed out by this embossing machine is clear and rough enough,
and the automatic strapping machine uses strong belt feeding.
2. The upper and lower flower wheels of the embossing machine are
equipped with synchronous gears to ensure synchronous rotation of
the upper and lower wheels, ensuring that the flower spinning on
both sides of the strapping tape is completely consistent,
increasing the beauty and transparency of the strapping tape.
3. When assembling the upper and lower flower wheels, a fixed gap
is left to prevent collision, which extends the service life of the
flower wheels
ABOUT AFTER-SALES
We provide comprehensive technical support and service for our PP
Strap Making Machine. Our team of experienced technicians can
provide a variety of services, including:
Pre-sales:
1.Layout plan of PP strap making machine.
2.Analysis of the cost of PP strap making machine.
3.Raw materials that can be used for PP strap making machine.
After-sales service:
1.Water and electricity circuits of PP strap making machine, circuit drawings, etc.
2.Installation, commissioning and training of PP strap making machine.
3.Maintenance service of PP belt making machine.
4.Regular maintenance and repair
5.Troubleshooting and diagnosis
6.Software updates and upgrades
7.Spare parts and accessories
8.Training and technical advice
ABOUT US:
We have more than 30 years of manufacturing experience in the
PP/PET strapping industry, and our R&D and after-sales
personnel often go abroad to study;
We are a manufacturing factory with our own production workshop,
and all accessories are processed by our own lathes.
We have our own production team, R&D team, after-sales team,
sales team, etc.
The quality of the machines we produce is stable and the
after-sales service is guaranteed.
FAQ:
Q:What is the voltage of PP strapping equipment?
A:380V/50HZ, we support customization
Q:Can the PP strapping production equipment be customized according
to the factory length?
A:Yes, we can customize the length according to the customer's
factory size.
Q:Where is the PP strapping equipment produced?
A:We are from China.
Q:Can PP strapping equipment provide after-sales service?
A:Yes, we have professional after-sales engineers who provide
24-hour online guidance.
Q:Is the quality of PP strapping equipment stable?
A:We have 30 years of manufacturing experience, and have their own
PP packaging belt production plant, equipment quality is stable,
the process is worth choosing.
Q:Does PP strapping equipment support customization?
A:We are a manufacturing plant that can customize model size,
extrusion capacity, voltage and so on according to customer
requirements.
