Automatic Custom PP Strap Recycling Packing Roll Extruder Machine
5mm
PRODUCT DESCRIPTION
PP strap making machine is mainly for producing PP strap.
The raw material can be 100% recycled material, which can reduce
the produce cost and get a good profit.
And The PP bale is the substitution of the steel strap and has a
lot of advantages such as good extension, high temperature
resistant, easy use.
It is mainly suitable for packaging for various trades.
| Model No. | Screw Size | No. of strap | Capacity | Total Power | Width Range | Thickness Range | Installation Dimensions |
| JTPP-90 | 2800mm | 2 | 100kg/h | 80kw | 5-19mm | 0.4-1.2mm | 30*2.0*4.0M |
| JTPP-100 | 2800mm | 3 | 150kg/h | 90kw | 5-19mm | 0.4-1.2mm | 30*2.2*4.0M |
| JTPP-110 | 3300mm | 4 | 200kg/h | 100kw | 5-19mm | 0.4-1.2mm | 38*2.0*4.0M |
| JTPP-110 | 3300mm | 6 | 130kg/h | 100kw | 5-19mm | 0.4-1.2mm | 38*2.0*4.0M |
Plastic Strapping
Plastic strappping materials are made from Polyester,Polypropylene
and are available in a variety of strengths,
styles,and finishes.Unlike steel strapping,elongation and recovery
are a key factor for deciding which type of
plastic strap to use.
Polypropylene Strapping
Polypropylene strapping is an economical strapping material
compared to other materials.it's designed for light to
medium duty unitizing,palletizing and bundling.Consistent pressure
to polypropylene strapping can result in
unrecoverable dead stretch and inability to return to its original
length
Features of PP strapping production line:
1. It is suitable for all levels of recycled plastic particles, and
produces sandwich belts and PP environmentally friendly packing
belts;
2. It can be used to directly produce manual packing belts;
3. It can also be directly processed into hand-use, machine-use,
printing packing tape, ultra-wide, ultra-thin, ultra-narrow,
transparent, dyeing, and printing PP packing tape;
4. It is currently the most cost-effective and competitive product
on the market, and is popular among small and medium-sized
investors;
5. It can produce all kinds of manual belts, machine-use PP packing
belts and export belts.
Advantage of our machine
Now introduce you our machine general design concept :
1. pet pp straps can produce by same machine . only change the
mould and PLC program is ok. This changing can finish within a very
short time.
2.for pet crystallization and humidity removing system
Main features :
- Molecular sieve drying , dew point:-30~ -45℃
- Has three functions : crystallization, drying and humidity removing
.
Honeycomb humidifier
Big volume heating tank, remove water, dust effectively
Rise IV from 0.65-0.8
3.pet pp straps extruder
special designed screw and barrel. motor , gear box all adopt high
quality supplier.
4. mould same as Italy design , change mould core very easy.
5. water tank: temperature constant keeping, tank can move by motor
control in up and down , left and right , forward and backward.
6. rollers surface treatment high precision. Adopt inclined gear
drive , not chain, this is very strong and stable. Big stretching
motor enough to afford the high stretching rate. This guarantee
make high stretching rate straps.
7. heating oven upper and down side all have heaters. Install with
blower, this keep stable temperature inside the oven. Oven tank
middle layer has insulation layer to keep constant temperature. The
oven open and close drive by motor, stable and safety. Oven had
checking window to check the stretching points for operator .
inside the oven, there are drive rollers to keep straps winding
inside the oven to get enough temperature.
8. embossing high precision embossing rollers. Two rollers drive.
Can give stable , evenly and clearly embossing to each pieces of
straps.
9. calibration forming system
We adopt heating and water cooling combination system. Heating oven
give stable heating to the straps, and water tanks give correct low
temperature to let the straps get quenching . water remover system
installed in the water tank.
10 . winding system.
We have manual and PLC control automatic winder for customer
selection.
11. electric system
PLC touch screen control, by pressure close-loop controlling
method.
All above parts designing and purchasing , we adopt CE standards.
Europe safety level. All the problems which is possible happened in
the machine , we had all considered already. Economic and practical
, professional designing and precision processing are our focus
features.
