High Production Energy Saving PET Strapping Packing Band Production
Line
PRODUCT DESCRIPTION
PET strap production line adopt advanced technology, optimized
equipment performance, it has easy operation and long service life.
100% recycling material from the PET bottle flakes.This production
line is mainly used for the production of PET strap, packaged with
good flatness, production speed advantages.
PET packing strap is widely used, replaced for steel strap for
packing application internationally, because of its good tensile
strength, flexible, low prolongation rate, good performance of high
temperature resistant, non-rustiness, and low use-cost, etc, it is
used in steel, construction material, chemical fiber, paper making,
tobacco, agriculture, election, etc.
PET Strap Production Line Machine List
| NO. | Item | Specification |
| 1 | Power | According to customer's factory voltage |
| 2 | Material | PET raw material or 100% PET bottle flakes recycled |
| 3 | Capacity | PETJT90:200kg/h PETJT100:250kg/h PETJT125:350kg/h |
| 4 | Product size | Width:9-32mm Thickness:0.6-12mm |
| 6 | Mid-height of extruder | 7000mm |
| 7 | Installation power | PETJT90:200KW PETJT100:250KW PETJT125:300KW |
| 8 | Humidity | <85% |
| 9 | Temperature | 0-40 degree |
| 10 | Cooling tower capacity | 30T/H or 50T/H |
| 11 | Installation Dimensions | PETJT90:45*2.0*7.0M PETJT100:45*2.0*7.0M PETJT125:60*3.0*8.0M |
| 12 | Product color | Green/Black/Pink/Yellow |
| 13 | Factory dimension | 35m*(3~6)m*(4~6)m 45m*(3~6)m*(4~6)m If your factory not big enough,please contact with us,our engineer
can according to your size to design |
Features of PET packing strap production line:
This production line uses PET waste mineral water, Sprite, Coke and
other bottle flakes as raw materials to produce packing belts, with
low cost and high efficiency.
The computer control system is used for real-time control of melt
temperature, pressure, extrusion speed, torque, traction, etc. to
ensure product quality. Equipment composition: Special equipment
Three stretching machines, ovens, molds, traction machines, control
boxes, winders, etc. General equipment Feeder, extruder, mold
temperature machine, chiller, dryer, air compressor, etc.
Features: ·PET belt, also known as plastic-steel belt, is a new
type of strapping belt that is popular in the world to replace
steel belt. It is widely used in steel, aluminum, chemical fiber,
cotton spinning, tobacco, paper, metal can making and other
industries.
·Strong tensile strength: It has both the tensile strength like a
steel belt and the ductility that can resist impact, which can
ensure the safety of your product transportation.
·Small elongation: The elongation is only one-sixth of that of
polypropylene (PP) tape, which can maintain tension for a long
time.
· Strong temperature resistance: the melting point is 260 degrees,
and it will not deform when used below 120 degrees. ·Good
flexibility: no sharp edges of steel belts, safe operation, neither
hurting hands nor damaging the bundled objects.
·Beautiful appearance and no rust: There is no risk of rusting the
steel belt to contaminate the bundled objects, and the color is
bright and can be seen.
·Good economic benefits: The length of 1 ton of plastic steel belt
is equivalent to 6 tons of steel belt, and the unit price per meter
is lower than that of steel belt, which can reduce the cost for
you.
TECHNICAL SPECIFICATION ABOUT PET STRAP MAKING MACHINE
- For the PET strap packing into a roll. The center automatically
arranged winding. Consists of: closing reel, core, transmission
unit, winding displacement unit, rack, electrical control parts,
etc.
- Automatic computer control winding disk diameter and length of the
winding.
- Winding parameters, cable parameters can be set according to the
product specifications by computer.
- Servo motors are used to control the width and spacing of winding
displacement.
- Straps entrance with protection device.
- Torque arm directly separately checks the location and pneumatic
plug to maintain the tension of straps.
